Jual Alat las PVC Idemitsu Winning MD-80 Hot Jet / WJ-25 Series

MD-80 diganti dengan WJ25 Series,
Download Keterangan WJ25 Series Link Dibawah :

WJ-25 Series

Model: MD-80 (Made in Japan)
MD-80 is a Hot-Jet Welding machine as the standard model and with improvement of low noise by inventing Diaphragm Blower.

Features

  • Low noise owing to diaphragm blower.
  • Clean air can always be supplied as rotor vane is not used.
  • Auto stop function to avoid the damage on the blower.
  • Wide variation of usage such as welding thermal plastic, drying limited part, shrinking small diameter tube, and for the machine of P.P. rope.
  • Simple operation of welding.
  • Less damage on the blower by simplifying each part.

Preference temperature at certain scales

  • Normal temperature : 20°C
  • Nozzle tip : 7mm
  • Measurement of Surface : 3-90°C, 5-160°C, 7-250°C
  • Temperatures : 9-310°C, 11-400°C

Specifications

Source of Power 220 Volts
Frequency 50 Hz
Maximum Output 800 Watts
Range of Temperature 0 ~ 400°C
Wind Volume 80L/min.
Wind Pressure 0.2 ~ 0.3 kg/cm2
Weight 12 kg

Warning

  • As every Main Page and Nozzle part of Welding Gun is heated with use, never touch these parts and keep off flammable objects. Make sure to put these parts on the particular stand with heat resistance after switching off the machine.
  • The length of air hose for type MD-80 must be within 5 meters.
  • The material of welding rod must be same as the base material, not with standing the different thickness. Otherwise, the welding is impossible to be worked.

Images

WINNING PVC Welder 800w 0.3Bar 0~400degree 80L/min 12kg MD-80WINNING PVC Welder 800w 0.3Bar 0~400degree 80L/min 12kg MD-80WINNING PVC Welder 800w 0.3Bar 0~400degree 80L/min 12kg MD-80

SKU: 8436 Kategori:

Deskripsi

MD-80 diganti dengan WJ25 Series,

Download Keterangan WJ25 Series Link Dibawah :

WJ-25 Series

Ulasan

Belum ada ulasan.

Be the first to review “Jual Alat las PVC Idemitsu Winning MD-80 Hot Jet / WJ-25 Series”

Alamat email Anda tidak akan dipublikasikan.