The KANE900 PLUS handheld analyser is easy to use for domestic and industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution.
Measures O2, flue and nett temperature and calculates CO2, boiler efficiency, excess air and losses.
CO is measured with a hydrogen compensated sensor for increased accuracy.
It also measures CO and calculates CO/CO2 ratio – ‘The Poison Index’ – to give complete readings for effective boiler analysis and safety.
Measures NO and calculates NOx.
Big character display
IR printer link… printed header can be customised
Large memory to store results for easy transfer to PC
Long life battery recharged in situ
Product Features :
|Flue Temperature||0.1°C/F||+2.0°C +0.3% reading||0-1200°C/32 -2200°F
with suitable probe
|Inlet Temperature||0.1°C/F||+1°C +0.3% reading||0-50°C/32-122°F|
|Pressure (optional)||0.1mbar||+2% of full scale||+150mbar
|Gas Measurement *1|
(standard H compensated)
|0.01%||+5% reading from
0.1% to 10%
|Nitrogen Oxide (low range)||1ppm||+2ppm <30ppm
|Nitrogen Dioxide||1ppm||+5ppm <100ppm
|Sulphur Dioxide||1ppm||+5ppm <100ppm
|Carbon Dioxide*2||0.1%||+0.3% reading||0-99.9%|
|Temp (Nett)||1.0°C/F||+2°C +0.3% reading||0-600°C/32-1112°F|
*1 Using dry gases at STP
|Pre-programmed Fuels||Natural gas, Town gas, Gascor, Light Oil, Heavy Oil, Propane, Butane, Anthracite, Coke, Coal, Kinsale Gas.|
|Handset||220mm x 55mm x 120mm|
|Probe||L240mm x Dia8mm with 285mm long stainless steel shaft, type K thermocouple and 1.5m long neoprene hose|
|Ambient Operating Range||-5°C to +50°C/10% to 90% RH non condensing|
|Power Supply (battery charger)||Input: 110Vac/220 Vac nominal
Output: 12 Vac off load
|Battery Life||>6 hours from full charge|