Exclusive moisture in building will lead to decay and deterioration
of components and decorative finishes. Professional involved with
the identification, management and remedy of dampness need tools
that help them to :
*) Identify the extent of the dampness
*) Diagnose the cause of the problem
*) Monitor change in the moisture level
Measure Mode :
• Pin-type probes measure moisture in wood and other building
materials (use provided calibration chart for more precise readings)
• Detects moisture directly in materials and below wall and floor coverings
such as tile, wood and vinyl
• Deep wall probes establish the presence of moisture in wall cavity insulation,
sub and surface structures
• Assess, in relative terms, if the material is in a dry, borderline or damp condition
Applications :
Concrete and concrete block, wood and wood floors, drywall, stucco, plaster,
masonry and EIFS.
• Moisture Range (WME) :
– Range : 0 to 999 relative (non-invasive)
– Range : 7% to 99% WME (pin measurement)
• Max. needle penetration : 0.4″ (10mm)
• Non-Invasive (RF) moisture range :
6 to 100% (relative) up to 3/4″(19.05mm) deep
• Resolution : 0.1%
• Power : (1) 9v battery (included)
• Dual Display LCD and LED
Digital 60 LED’s Green (“dry”) , Yellow (“at risk”) and Red (“wet”)
Digital LCD
• Audible alert (may be switched on/off by the user)
• Auto power off (ay be switched off, or set between 1-3 minutes, by the user)
• Reset reading for sensitivity adjustment
• Hold Feature

SKU: 579 Kategori:


Belum ada ulasan.

Be the first to review “Jual BUILDING MOISTURE METERS”

Alamat email Anda tidak akan dipublikasikan.