Jual Pompa Pedrollo / Pedrollo Pump type JSW 3

Download_Katalog_JSW3-5_PDF

RANGE OF PERFORMANCE
Flow rate up to 120 l/min (7.2 m³/h)
Head up to 96 m

LIMITS OF USE
Manometric suction lift up to 9 m
Liquid temperature up to + 40°C
Environment temperature up to + 40°C

 

SKU: 8938 Kategori:

Deskripsi

INSTALLATION AND USE
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
JSW SELF-PRIMING PUMPS ARE DESIGNED FOR SUCTION LIFTS AND CAN BE POSITIONED ABOVE THE WATER SOURCE, INCLUDING APPLICATIONS WITH AIR ENTRAINED IN THE WATER. DUE TO THEIR RELIABILITY AND LOW MAINTENANCE, THEY ARE RECOMMENDED FOR DOMESTIC USE, INCLUDING WATER DISTRIBUTION (AS PART OF A PRESSURE SET), GARDEN IRRIGATION, ETC.
The pumps must be installed in enclosed places, or at least protected against inclement weather.

CONSTRUCTION CHARACTERISTICS
PUMP BODY: cast iron, with threaded ports ISO 228/1.
BODY BACK-PLATE: cast iron.
EJECTOR ASSEMBLY: technopolymer
(approved for drinking water).
IMPELLER: brass.
MOTOR SHAFT: stainless steel EN 10088-3 – 1.4104.

MECHANICAL SEAL: ceramic – graphite – NBR.
ELECTRIC MOTOR: the pumps are close-coupled to a carefully matched PEDROLLO electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.
JSWm: single-phase 230 V – 50 Hz with capacitor and thermal overload protector.
JSW: three-phase230/400 V – 50 Hz.
INSULATION: class F.
PROTECTION: IP 44.
REGISTERED MODEL nº 72753.

 

Ulasan

Belum ada ulasan.

Be the first to review “Jual Pompa Pedrollo / Pedrollo Pump type JSW 3”

Alamat email Anda tidak akan dipublikasikan.