Jual Electric Chain Hoist RCP2DC

Plain Trolley Type Compact Electric Chain Hoist RCP2DC (24V DC)

Features

  • Can be operated on 24V DC*1 including car batteries.
  • Shorter headroom enables greater hoisting distance. The rated load has also been increased to 250 kg for improved work efficiency.
  • Oil bath lubrication keeps the gears and mechanical brake highly wear-resistant and durable.
  • Friction-clutch over-winding protector*2 comes standard.
  • The load chain is made from a special alloy steel for increased strength. A rustproof chain is optionally available.
  • The hoist can either be integrated into the plain trolley or suspended from it with a hook.*3 (The diagram below shows an integrated hoist.)

SKU: 8629 Kategori:

Deskripsi

Specifications for Plain Trolley Type Compact Electric Chain Hoist RCP2DC


Power supply Type Item no. Rated load (kg) Standard lift (m) Hoisting speed*4 DC motor output (W) Short-time rating (min) Duty cycle*5 (%ED) Hoist class
Standard
DC24V 1-speed RCP20025DC 250 3 0.0833m/sec
[5m/min]
200 30 40 M4
6

 

 

Item no. Load chain Power cable length (m) Net weight (kg) External dimensions (mm)
Diameter (mm) No. of falls A B D E ♦F
RCP20025DC 4 1 5 20 236 199 88 91 24
21

 

 

Item no. External dimensions (mm)
G H I K L ♦M ♦P ♦Q ♦S(m)
RCP20025DC 280 28+b/2 92 160 12-t2 b-34 360 120 2.5
460 5.5

 

 

Notes:

  • Figures marked with a (♦) are for reference purposes only.
  • Specifications are subject to change for improvements without notice.
    • *1: This hoist can run for about two hours on two fully charged 30A19R (21 Ah at a 5-hour discharge) batteries used for small trucks. When using it on a vehicle, keep the engine in idling during the operation.
    • *2: The friction-clutch over-winding protector should not be activated except for emergency cases. DO NOT leave the over-winding protector running with the load suspended at the lifting and lowering limits.
    • *3: A hoist suspended from the trolley requires longer minimum headroom G than the integrated one.
    • *4: This is an average speed when the hoist is operating with a rated load. Hoisting speed is subject to change depending on whether lifting or lowering, on the size of a load, and on the voltage and frequency being used.
    • *5: Duty cycle (%ED) is the ratio of the active (motor operating) time to the duration of a complete cycle. It is calculated based on the assumption that the hoist is lifting a load 63% of the rated one.

Ulasan

Belum ada ulasan.

Be the first to review “Jual Electric Chain Hoist RCP2DC”

Alamat email Anda tidak akan dipublikasikan.